Payment & Shipping Terms:
|Model:||QX-R（2500）||Cutting Device:||Circular Knife Cutting|
|Winding Mode:||Special Pneumatic Compression Device, Technology And Domestic Lead||Cutting Raw Material:||Spunlace Cloth, Non-woven, Etc|
|Use Power:||Imported Motor||Production Speed:||Depending On The Material|
|Weight:||Specific Weight Depending On The Machine Configuration||Speed:||50-150/min|
Non Woven Fabric Cutting Machine,
Non Woven Roll Cutting Machine
Large High Speed Non Woven Fabric Cutting Machine With Circular Knife Cutting
2.5 meters large water thorn cloth, spun-bonded fabric, automatic cutting machine, rewinding machine woven cloth
For running stability, speed and segmentation effect of cutting and cutting machine to rival Taiwan. Equipment for the cutting and rewinding can be water thorn cloth, wood pulp, cloth, needle cloth, cloth of melt-blown, bounding cloth, spun-bonded fabric, products such as cutting and neat without flash, this machine is used for processing cored or coreless, rolling, light box cloth inspection equipment, cutting, counting, winding at the same time, according to customer request a change of a variety of equipment, production can also provide customers with a variety of rolling, winding way, magnetic powder tension control, horizontal tension control, conveyor belt, servo control tension control method, so as to adapt to all kinds of production requirements, achieve the best cutting effect.
1. equipment unwinding, lamp box checking, slitting, counting and winding simultaneously. The end surface is neat and neat.
2. machine door width of 3500 mm, maximum diameter of 1200 mm
3. place the original cloth with a single drum synchronous conveying system, gas expansion shaft unwinding roll, unwinding roller diameter 350mm, and using plating light roller stability.
4.. Machine speed can be adjusted to 150 meters per minute (depending on the characteristics of the fabric fixed speed).
5. winding device with the whole exhaust pressure adjusting device, both ends of the linear slide up and down, the tooth row parallel positioning rolling roller, pneumatic shaft winding, the winding drum diameter 350mm (1 pieces with wear roller, 1 electroplating roller).
6. cut width can be adjusted within a certain range, the maximum diameter of finished product is 1200 mm (within 1200mm adjustable).
7. device is equipped with 13 high precision aluminum alloy roller with blast wrinkle, discharging device, stepless speed regulation, slitting and rewinding speed, counting, cutting knife 5 sets of gas line.
8., the use of Taiwan production shear type pneumatic knife, left and right can be adjusted freely, adjust the cutting width, convenient and flexible.
9., the whole machine equipped with 6 cylinders, the whole machine frame are made of 40mm thick steel plate, in which the unwinding frame is about 1500mm * 2000mm high, the cloth inspection corridor is about 1500mm wide, and the take-up part is about 1500mm * 2000mm. high
10 machine electric power 13.5KW, using PLC programming, touch screen (10 inches), joint control, servo system which adopts 5.5KW servo unwinding and winding servo servo motor by using 7.5KW, "Taiwan Xinjie" brand, the touch screen and the Taiwan "Willen" brand, electrical wiring parts specification is reasonable, safe and orderly and simple operation.
11. tension control adopts 100 kg servo tension sensor, unwinding and rewinding servo are all equipped with worm gear worm gear box.
12. of the wall is fixedly connected with international steel molding, surface anticorrosive processing, all machine bedplate must do antirust paint processing, frame welding precision, support appropriate reinforcement, and all transmission part adopts synchronous belt transmission, to ensure the stable operation of the machine.
13. standard screws, the main components of domestic high-quality 45# steel and six angle screws, the products easy to cause health effects of components using stainless steel materials.
The company also provides a variety of unwinding and rewinding, magnetic powder tension control for customers, cross tension control, conveyor belt tension control, servo control and other methods, in order to adapt to the various production requirements, to achieve the best cutting effect.
At present, similar equipment in the same industry, no matter in the quality of production or technical indicators, can not compare with our factory.